dsms
       MSDS<>
Home >MSDS       
Material Safety Data Sheet

1.Chemical Product and Company Information

Product      

Clothing Deodorant and Anti-Bacteria Spray  20 ml  AWI-98

Company   

Air Water Sol Inc.

Address

2-16-2 Iwamoto-cho, Kanda MC Bldg., Chiyoda-ku Tokyo Japan  (Main Office)
817-1 Sanga, Minori-cho, Ibaragi-gun, Ibaragi Japan  (Research Center)

Department

Research and Development Dept.

Telephone

03-5835-3900  (Main Office)   0299-48-4402  (Research Center)

Fax

03-5835-3908  (Main Office)   0299-48-4401  (Research Center)

 

In case of emergency, Please call Research and Development Dept. at the Research Center.


2.Composition/Information on Ingredients (a mixture)

Ingredients

CAS* No.

PRTR*

ISHL*
(Reg. No.)

Content
(Weight %)

Ethanol

64-17-5

NA

№ 62

20~40

Other additives

 

NA

NA

Under 1

Liquefied Petroleum Gas

Propane

74-98-6

NA

NA

10~30

i-Butane

75-28-5

NA

NA

10~30

n-Butane

106-97-8

NA

№ 480

20~40

*CAS: Chemical Abstracts Service Registry Number
*PRTR: Pollutant Release & Transfer Register
*ISHL: Industrial Safety and Health Law


3.Summary of Toxicity and Hazards

Most Acute Toxicity and Hazards

*Combustible gas and liquid which burn extremely easily. Danger of possible explosion due to accumulation of residual vapor.

Classification

*High pressured gas (combustible gas)

 

*Flammable liquid

Harzards

*Combustible gas inside. Danger of rupture due to rise in internal pressure caused by ignition or high temperature.

 

*Extremely combustible liquid. Danger of possible explosion due to accumulation of residual vapor.

Toxicity

*Can cause irritation to eyes, skin and respiratory tract.

 

*Use comparatively harmless industrial-grade solution, but when vapor is inhaled it functions as an anesthetic, and with repeated use, irritation of the mucous, dizziness, dulling of the senses and headache occur.


4.First Aid Measures

Contact with Eyes

*Wash immediately for at least 15 minutes with a large amount of clean water. Alternatively, use boric acid solution and continue washing with clean water for a long period of time.

 

*Immediate treatment by a medical specialist.

Contact with Skin

*Quickly wipe the contact area with a cloth.

 

*Wash sufficiently with water, soap or a cleansing lotion for skin use.

 

  Do not use solvents or thinners.

 

*If an external change is noticed or there is pain, have a treatment by a medical specialist.

Inhalation

*When a large quantity of gas or vapor is inhaled, the affected person should be moved to a location with fresh air, and keeping him warm and calm. If breathing is irregular or stops, conduct the artificial respiration.

 

*Do not let him swallow vomit.

 

*If a person feel bad after inhaling gas, keep him calm in a place where there is fresh air, and have him treated by a medical specialist.

Ingestion

*If inadvertently ingested, keep the person calm and have him treated by a medical specialist.

 

*Do not let him swallow vomit.

 

*Do not let him cough excessively unless instructed by a physician.

5.Fire Fighting Measures

Extinguishing Media

*Type AB or BC powder fire extinguishers, Carbon dioxide, Foam or Sand

Extinguishing Methods

*Undertake the fire extinguishing from upwind. Those engaged in the fire extinguishing should wear suitable protective gears (fireproof clothing and eye protection) and use breathing apparatus.

 

*Quickly remove all combustible materials from the area.

 

*Used designated extinguishers.

 

*If aerosol containers are present, there is a danger of rupture. When engaged in the fire fighting, persons should keep a sufficient distance away, and containers exposed to heat should be cooled with water.


6.Accidental Release Measures

Personal

*To prevent exposure, proper protective gears should be worn during work.

Precautions

*If leak occurs (a gush out), the measures should be taken from upwind, and the leaking part of the container should be turned to upward to let all gas gush out before taking the measures.

 

*Sources of combustion and high temperature items in the vicinity should be removed immediately, and people should take refuge upwind.

 

Only authorized personnel are allowed in the area.

 

*Suitable fire extinguishers should be prepared in case of a fire brake.

 

*If large quantity of vapor arises, the generation of the vapor should be held down by spraying with water.

Environment

*The leaked liquid should not be discharged into the sewer or the gutter.

Precautions and Removal Methods

*The leaked liquid should be collected in a sealed container, and the residual liquid should be absorbed with sand or an inert absorbent and moved to a safe location.

 

*The leaked liquid should be collected using a device made of material which will not generate sparks though an impact or static electricity.

 

*For small leakage, sand is to be spread to absorb the liquid or it should be collected using a complementary method.

 

*For large leakage, the flow should be stopped with sand and lead the liquid to a safe location for the collection.


7.Handling and Storage (work is to be conducted in accordance with the pertinent regulations)

Handling

 

Technical Measures

*When the product is used, the wind should be blow behind the person using the product so that the product does not come in direct contact with the person.

 

*It should be handled in well ventilated areas.

 

*Fire, sparks and high temperature items are not allowed to be used in the vicinity.

 

*The product should not be sprayed in the direction of a fire.

 

*If placed in areas where the temperature rises high, there is a danger of container rupture.

 

*Suitable protective gears should be worn to prevent contact with skin, mucus or clothing, and inhalation or entering eyes.

Precautions

*For work done in enclosed areas, the work should be done with the sufficient ventilator should be installed and the person should wear suitable protective gears.

 

*After handling, hands should be washed thoroughly and if the product sticks to the clothing, the clothing should be changed.

 

*Measures are to be take against static electricity and anti-static material should be used for clothes and work shoes.

Safe Handling Advice

*Work should be done while wearing protective gears to prevent exposure to leakage.  Avoid inhalation of vapor and contact with skin.

 

 

Storage

 

Suitable Storage

*Store in a place where children cannot reach.

Conditions

*Avoid direct sunlight and provide good ventilation.

 

*Because a possibility of leak or gush out due to corrosion of the container, avoid storing in humid places, such as kitchen and bathroom.

 

*Store away from fire or source of heat.

 

*Do not store in areas where the temperature rises above 40℃.

 

*Fire regulations, labor & health regulations and other regulations should be observed.


8.Exposure Control and Personal Protection

Place of Use

*There should be no sources of high temperature or fire near to where the product is used.

 

*When work is carried out in enclosed areas, a ventilator should also be used.


Name of Material

Control
Concentration (ppm)

ACGIH (ppm)

ACGIH (mg/m3)

Ethanol

No data

1,000

No data

Liquefied Petroleum Gas

Not established

Not established

Not established


Protective Gears

 

Breathing

*Antitoxin for organic gas, anti-dust mask, air mask for use in enclosed areas

Hands

*Gloves made of material which does not permit penetration of organic solutions and chemicals.

Eyes

*Protective glasses

Skin and Body

*Work clothes, safety work shoes

Suitable Hygienic Practices

*No smoking, eating and drinking while working.


9.Physical and Chemical Properties

Physical State

Main Ingredient

Liquefied Petroleum Gas

State

Liquid

Gaseous state under normal pressure, Liquid state in a pressurized container

Color

No color, transparent

No color, transparent

Odor

Alcohol odor

Odorless

Specific temperature or temperature range whereby the physical state changes.

Boiling Point / Range

78.325℃

-42.1~-0.5℃

Flash Point / Range

14℃

-104.4~-73.8℃

Ignition Point / Range

Above 392℃

405~550℃

Vapor Pressure

5.866kPa (20℃)

0.54MPa (20℃)

Density

0.79 (20℃)

0.53 (20℃)

Solubility

Dissolves easily in water

Dissolves slightly in water

10.Stability and Reactivity

Stability

*When the temperature reaching above 40℃, there is a danger of rupture.

 

*Pressure in a container at room temperature is about 0.37MPa.

Conditions Avoid

*Storage in areas of high temperature and humidity or use near fire.

Hazardous Decomposition Products

*None in particular


11.Toxicological Information

*Ethanol

 

Acute toxicity:

Volume leading to certain death of an average person if drank all within one hour is 300~400 ml of pure ethanol. Children enter into critical symptoms with 1mg/kg of denatured alcohol which contains 5% methanol.

 

Rats:(Oral) LD50      13.7 ml/kg
Rabbits:(Oral) LD50    9.4 ml/kg
Humans:(Oral) LDL0      1,400 ml/kg

 

Depending on the volume ingested, ethanol suppresses the central nerve system in an irregular fashion in order from the cerebral cortex to the marrow. There is only a small difference between the amount which causes anesthesia and the amount which damages reproductive organs. This means that the amount which causes a coma is close to the amount causing certain death and is dangerous. The pathological findings of acute lethality due to ethanol are cerebral edema, bleeding or edema of the alimentary tract. The pathology of patients after death who imbibed large amounts of ethanol habitually showed degeneration of the liver, kidneys and brain, atrophic gastritis and cirrhosis of the liver.

 

Light:    (Alcohol in blood 0.05~0.15%, or 0.5~1.5mg/ml) Reduction in self control, light impairment of vision, light lack of coordination in muscle movement, and delay in reaction time. About 25% of the people in this group are in clinically semi poisoned.

 

Medium: (Alcohol in the blood 0.15~0.3%, or 1.5~3mg/ml) Obvious impairment of clear vision, loss of senses, lack of muscle coordination, delay in reaction time, inarticulate speech. About 50%-90% of the people in this group are in clinically poisoned.

 

Severe: (Alcohol in the blood 0.3~0.5%, or 3~5mg/ml) Very noticeable lack of muscle coordination, blurred or double vision. Nearly comatose. Critical hypoglycemia, the drop in body temperature, combined symptom, hardening of the extensor muscles of the four limbs, unilateral or bilateral Babinski symptoms, sprains and lockjaw. Death starts in this range.

 

Comatose State:(Alcohol in the blood over 0.5%, or over 3~5mg/ml) Unconsciousness, delay in breathing, loss in reaction and complete loss of senses. In this range death often occurs.

Chronic poisoning:

1. General symptom:Loss of weight

 

2. Digestive system:Cirrhosis, poor appetite and inflammation of stomach with diarrhea.

 

3. Nerve system:

 

a. Multiple neuritis accompanied by pain. Loss of motion function in the limbs and loss of the senses.

 

b. Atrophy of optic nerve.

 

c. Mental deterioration accompanied by loss of memory, tremors, impairment of judgment, and other loss or impairment of abilities.

 

d. Alcoholic abstinence syndrome or ethanol withdrawal symptoms.

Metabolic excretory:

No significant information

Sudden mutation:

No significant information

Teratogenesis:

No significant information

Source of Cancer:

No significant information

Other effects:

No significant information

 

 

*Liquefied Petroleum Gas

: As of this time there is no specific information regarding hazards.

 

 

*Product hazard

: No tests are being conducted concerning safety as a product.


12.Ecological Information

*Ethanol

: No data

*Liquefied Petroleum Gas

: Law pollutant fuel


13.Disposal Considerations

Residual Waste

*When disposing, the gas should be discharged completely before handling.

 

*The liquid remain after the safe discharge of the gas should be entrusted to authorized disposal companies, or;

 

make a hole in the container and let the liquid absorbed in diatom earth and burn the earthy in an open type incinerator little by little.

 

*Waste water used to wash the container and mechanical equipment should not be allowed to flow on the ground surface or into gutters.

Contaminated Containers and packing

*To be separately disposed of after the content has been completely used.


14.Transport Information

Specific Transport Safety Measures

*When being transported, the container temperature should be maintained under 40℃, and the container should be loaded in the ways that there are no tumbling, no falling and no damaging. Prevention of cargo collapse should be firmly undertaken

Land Transport

*Transport in accordance with Fire Service Law and other regulations.

Sea Transport

*Transport in accordance with Ship Safety Law.

Air Transport

*Transport in accordance with Civil Aeronautics Law.

UN Classification and
UN Number

Class 2   1950


15.Regulatory Information

High Pressure Gas Safety Law

: Not applicable (liquefied gas, combustible gas)

Ship Safety Law

: Hazardous materials (high pressured gas), medium flash point flammable liquid

Civil Aeronautics Law

: High pressure gas, flammable liquid

Fire Service Law

: Hazardous type 4 alcohol, hazardous level II

Industrial Safety and Health Law

: Combustible gas, flammable materials

Poisonous and Deleterious Substance Control Law

: Contains no designated substances.


16.Other Information

*Source:

Ethanol MSDS

Liquefied Petroleum Gas MSDS

All material data covered by under Act on confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management There of (PRTR Law)

All material dada covered by under Industrial Safety and Health Law(Chemical Daily Co., Ltd.)

All material data covered by under Poisonous and Deleterious Substance Control Law (Chemical Daily Co., Ltd.)


*Note:

This information may be revised based on new knowledge.

The information listed here does not guarantee the completeness or the accuracy of the information.
Since there are unknown hazards for all chemical products, the great care is required when handling them. Decision concerning the suitability of this product is to be made under the responsibility of the user.