dsms
       MSDS<>
Home >MSDS       
Chemical Product and Company Information

1.Chemical Product and Company Information

Product      

Defense Spray 20 ml

Company   

Air Water Sol Inc.

Address

2-16-2 Iwamoto-cho, Kanda MC Bldg., Chiyoda-ku Tokyo Japan  (Main Office)
817-1 Sanga, Minori-cho, Ibaragi-gun, Ibaragi Japan  (Research Center)

Department

Research and Development Dept.

Telephone

03-5835-3900  (Main Office)   0299-48-4402  (Research Center)

Fax

03-5835-3908  (Main Office)   0299-48-4401  (Research Center)

 

In case of emergency, please call Research and Development Dept. at Research Center


2.Composition/Information on Ingredients (a mixture)

Ingredients

CAS* No.

PRTR*

ISHL*
(Reg. No.)

Content
(Weight %)

Ethanol

64-17-5

NA

№ 6

20~30

Menthol

2216-51-5

NA

NA

Under 3

Water

NA

NA

NA

20~30

Other additives

NA

NA

NA

Under 3

Liquefied Petroleum Gas

Propane

74-98-6

NA

NA

10~20

i-Butane

75-28-5

NA

NA

10~20

n-Butane

106-97-8

NA

№ 480

20~30

*CAS: Chemical Abstract Service Registry Number
*PRTR: Pollutant Release & Transfer Register
*ISHL: Industrial Safety and Health Law


3.Summary of Toxicity and Hazards

Most Acute Toxicity & Hazards

*Combustible gas and liquids which burn extremely easily. Danger of possible explosion due to residual vapor.

Classification

*High pressured gas (combustible gas)

 

*Inflammable liquid

Hazards

*Combustible gas inside. Danger of rupture due to rise in internal pressure caused by ignition or high temperature.

 

*Extremely combustible liquid. Danger of possible explosion due to residual vapor.

Toxicity

*Can cause irritation to eyes, skin, and respiratory tract.

 

*Use comparatively harmless industrial-grade solution, but when vapor is inhaled it functions as an anesthetic, and with repeated use, irritation of the mucous, dizziness, dulling of the senses, and headache occur.


4.First Aid Measures

Contact with Eyes

*Wash immediately for at least 15 minutes with a large amount of clean water.

 

*If necessary, receive a treatment from a medical specialist.

Contact with Skin

*Quickly wipe the contact area with a cloth.

 

*Wash sufficiently with water, soap or a cleansing lotion for skin use.

 

*If necessary, receive a treatment from a medical specialist.

Inhalation

*When a large quantity of gas or vapor is inhaled, the affected person should be moved to a location with fresh air, keeping him warm and calm. If breathing is irregular or stops, conduct the artificial respiration.

 

*If the person feel bad after inhaling gas or vapor, keep him calm in a place where there is fresh air, and have him treated by a medical specialist.

Ingestion

*If ingested by mistake, wash the inside of mouth and have the person drink large quantities of water.

 

*Have him treated by a medical specialist.

 

*Do not give him anything to drink if he has lost consciousness.

5.Fire Fighting Measures

Extinguishing Media

*Type ABC or BC powder fire extinguishers, Carbon dioxide, Foam or Sand

Extinguishing Methods

*Undertake the fire extinguishing from upwind. Those engaged in the fire extinguishing should wear suitable protective gears (fireproof clothing and eye protection) and use breathing apparatus.

 

*Quickly remove all combustible materials from the area.

 

*Used designated extinguishers.

 

*If aerosol containers are present, there is a danger of rupture. When engaged in fire fighting, persons should keep a sufficient distance away, and containers exposed to heat should be cooled with water.


6.Accidental Release Measures

Personal Precautions

*To prevent exposure, proper protective gears should be worn during work.

 

*If leak occurs (a gush out), the measures are to be taken from upwind, and the leaking part of the container should be turned to upward to let all gas gush out before taking the measures.

 

*Sources of combustion, and high temperature items in the vicinity should be removed immediately, and people should take refuge upwind.

 

Only authorized personnel are allowed in the area.

 

*Suitable fire extinguishers should be available in case of a fire brake.

 

*If large quantity of vapor arises, the generation of the vapor should be held down by spraying with water.

Environment

*The leaked liquid should not be discharged into the sewer or the gutter.

Precautions and Cleaning Methods

*The leaked liquid should be collected in a sealed container, and the residual liquid should be absorbed with sand or an inert absorbent and moved to a safe location.

 

*The leaked liquid should be collected using a device made of material which will not generate sparks though an impact or static electricity.

 

*For small leakage, sand is to be spread to absorb the liquid or it should be collected using a complementary method.

 

*For large leakage, the flow should be stopped with sand and lead the liquid to a safe location for the collection.


7.Handling and Storage (work is to be conducted in accordance with the pertinent regulations)

Handling

 

Technical Measures

*When the product is used, the wind should be blowing behind the person using the product so that the product does not come in direct contact with the person.

 

*It should be handled in well ventilated areas.

 

*Fire, sparks, and high temperature items are not allowed to be used in the vicinity.

 

*The product should not be sprayed in the direction of a fire.

 

*If placed in areas where the temperature rises high, there is a danger of container rupture.

 

*Suitable protective gears should be worn to prevent contact with skin, mucus or clothing, and inhalation or entering eyes.

Precautions

*For work in enclosed areas, the work should be done with the sufficient ventilator installed and the person should wear suitable protective devices.

 

*After handling, hands should be washed thoroughly, and if the product sticks to the clothing, the cloth should be changed.

 

*Measures are to be take against static electricity, and antistatic material should be used for the clothes and work shoes.

Safe Handling Advice

*Work should be done while wearing protective gears to prevent exposure to leakage.  Avoid inhalation of vapor and contact with skin.

 

 

Storage

 

Suitable Storage

*Store in a place where children cannot reach.

Conditions

*Avoid direct sunlight and provide good ventilation.

 

*Because of possibility of leak or gush out due to corrosion of the container, avoid storing in humid places such as kitchen and bathroom.

 

*Store away from fire or source of heat.

 

*Do not store in areas where the temperature rises above 40℃.

 

*Fire regulations, labor & health regulations and other regulations should be observed.


8.Exposure Controls and Personal Protection

Place of Use

*There should be no sources of high temperature or fire near by to where the product is used.

 

*When work is carried out in enclosed areas, a ventilator should also be used.


Name of Material

Controlled
Concentration(ppm)

ACGIH(ppm)

ACGIH(mg/m3)

Ethanol

No data

1,000

No data

Liquefied Petroleum Gas

Not established

Not established

Not established


Protective Gears

 

Breathing

*Antitoxin for organic gas, anti-dust mask, air mask for use in enclosed areas

Hands

*Gloves made of material which does not permit penetration of organic solutions and chemicals.

Eyes

*Protective glasses

Skin and Body

*Work clothes, safety work shoes

Suitable Hygienic Practices

*No smoking, eating and drinking while working.


9.Physical and Chemical Properties

Physical State

Main Ingredient

Liquefied Petroleum Gas

State

Liquid

Gaseous state under normal pressure, Liquid state in a pressurized container

Color

No color, transparent

No color, transparent

Odor

Menthol odor

Odorless

Specific temperature or temperature range whereby the physical state changes.

Boiling Point / Range

No data

-42.1~-0.5℃

Flash Point / Range

No data

-104.4~-73.8℃

Ignition Point / Range

No data

405~550℃

Vapor Pressure

No data

0.54 MPa(20℃)

Density

0.90(20℃)

0.53(20℃)

Solubility

Dissolves easily in water

Dissolves slightly in water

10.Stability and Reactivity

Stability

*When the temperature reaching above 40℃, there is a danger of rupture.

 

*Pressure in a container at room temperature about 0.50MPa.

Conditions to Avoid

*Storage in areas of high temperature and humidity or use near fire.

Dangerous and Hazardous Decomposition Products

*None in particular

 


Reactivity

Precaution

*When the temperature reaching above 40℃, there is danger of rupture.

Stability

*Stable under normal conditions.

 

*Pressure in a container is about 0.5MPa at room temperature.


11.Toxicological Information

 

Propellant (Liquefied Petroleum Gas)

Content Liquid

Acute Toxicity

Currently, there is no information on concerning specific hazards

Not known

Other Toxicity

--

--

Ecological effects:

None

Not known


12.Ecological Information

*No data

*When leakage occurs or disposing the product, care should be taken as there is a danger of affects on the environment.


13.Disposal Considerations

Residual Waste

*When disposing, the gas should be discharged completely before handling.

 

*The liquid remain after the safe discharge of the gas should be entrusted to authorized disposal companies, or;

 

make a hole in the container and let the liquid absorbed in diatom earth and burn the earth up in an open type incinerator little by little.

 

*Waste water used to wash the container and mechanical equipment should not  be allowed to flow on the ground surface or into gutters.

Contaminated Containers and Packing

*To be separately disposed of after the content has been completely used.


14.Transport Information

High Pressure Gas Safety Law

: Not applicable (liquefied gas, combustible gas)

Ship Safety Law

: Hazardous materials (high pressured gas), medium flash point flammable liquid

Civil Aeronautics Law

: High pressured gas, flammable liquid

Fire Service Law

: Hazardous type 4 alcohol, hazardous level II

Industrial Health and Safety Law

: Combustible gas, flammable materials

Poisonous and Deleterious Substance Control Law

: Contains no designated substances.


15.Regulatory Information

High Pressure Gas Safety Law

: No applicable (liquefied gas, combustible gas)

Ship Safety Law

: Hazardous materials (high pressured gas)

Civil Aeronautics Law

: High pressured gas

Pharmaceutical Affairs Law

: Cosmetics


16.Other Information

*Source:

Ethanol MSDS
Liquefied Petroleum Gas MSDS
All material data covered by under Act on confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management There of (PRTR Law) (The Chemical Daily Co., Ltd.)
All material data covered by under Industrial Safety and Health Law (The Chemical Daily Co., Ltd.)
All material data covered by under Poisonous and Deleterious Substance Control Law (The Chemical Daily Co., Ltd.)


Note:

This information may be revised based on new knowledge.
The information listed here does not guarantee the completeness or the accuracy of the information.
Since there are unknown hazards for all chemical products, the great care is required when handling them. Decision concerning the suitability of this product is to be made under the responsibility of the user.